Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
1～12 item / All 12 items
Lightweight and compact! A manual matching device with three stubs that supports a passing power of 3kW.
The "SMTJ-30" is a manual tuner with a three-stub design that supports a passing power of up to 3kW. It features a lightweight and compact design. 【Features】 ■ For 2450MHz microwave ■ Supports passing power up to 3kW ■ Three-stub tuner ■ Lightweight and compact *For more details, please refer to the catalog or feel free to contact us.
Power items suitable for video and music! Innovative EIA with 1U form factor and 120V output capability.
"GPC-TQ" is a power item for addressing power supply noise and improving sound and image quality, specifically a "power conditioner with built-in step-up transformer." By using polycarbonate for screws, we aim to further enhance basic performance, while also using aluminum for the top panel to achieve even greater effects. 【Features】 ■ High-frequency band filtering technology ■ Ground mode switch *For more details, please download the PDF or feel free to contact us.
Automatic Integrator Digital Matcher
This is an introduction to the "Digital Matcher" handled by RF Technologies, which has responded to user feedback based on a wide lineup and unique value-added products such as wideband, pulse application, and superimposition, covering frequencies from LF to UHF. ---Features--- * Matching speed: From preset to under 1 second → From preset to under 0.5 seconds * Reflection: Under 1% → Almost 0W * Power dependence: Dependent around 0W → Non-dependent method * Controller: Half-rack size → Handy type (operable without attachment) * Preset: Setting volume (1 point) → Numeric input (multiple points can be stored) * O-balance: Adjustment volume → Numeric input * Motor speed: Board-mounted volume → Numeric input * Initialization: No memory function → Always reset to initial value * For more details, please contact us.
Equipped with TEMP alarm function! EH stub-type manual matcher compatible with up to 6kW!
The "MT-20S" is an EH stub-type manual tuner that supports up to 6kW. It comes with a TEMP alarm function. 【Features】 ■ For 2450MHz microwave ■ Supports 6kW ■ EH stub type ■ Equipped with TEMP alarm function *For more details, please refer to the PDF document or feel free to contact us.
Achieve high-speed matching with a unique matching algorithm! High-speed, high-precision EH-type automatic matcher. Available in a maximum 6kW specification with high power durability! Made in Japan for your peace of mind!
The "Piat-XX-CE/Piat-XX-2PM-CE" is an EH-type automatic tuner that achieves high-speed matching through a unique matching algorithm (direct matching). ("XX" represents the output. Example: 6kW → 60) Standalone operation is certainly possible, but by using an optional remote unit, you can utilize extended features such as external control and status monitoring using a computer. The "Piat-XX-2PM-CE" is a product that integrates the functions of a directional coupler with a detector into the automatic tuner. 【Features】 ■ High power tolerance due to the adoption of the EH type (maximum 6kW specification). ■ The H waveguide is bent, making it compact. ■ The unique matching algorithm has achieved a reduction in matching time. ■ Made in Japan *For more details, please refer to the PDF materials or feel free to contact us.
![[Discontinued] 3 Stub Tuner 'SMTJ-15'](https://image.mono.ipros.com/public/product/image/bae/2000302651/IPROS514418523525926129.jpg?w=280&h=280)
Lightweight and compact! A manual matching device with three stubs that supports a passing power of 1.5kW.
The "SMTJ-15" is a manual tuner with a three-stub design that supports a passing power of up to 1.5kW. It features a lightweight and compact design. 【Features】 ■ For 2450MHz microwave ■ Supports passing power up to 1.5kW ■ Three-stub tuner ■ Lightweight and compact *For more details, please refer to the catalog or feel free to contact us.
No need for water pipe routing due to natural air cooling! Compact, lightweight, and high-performance 3E microwave automatic tuner.
The "AMC-MU4-L1" is a matching device that automatically performs impedance matching for microwave transmission paths in the 2450MHz band. It automatically tracks load variations and suppresses the generation of reflected waves due to impedance mismatches. This product has achieved approximately 2/3 the size and about 1/2 the weight compared to conventional 4E microwave automatic matchers. 【Features】 ■ The matching section is a three-element tuner type with three movable short-circuits placed on the E-plane (long side) of the waveguide. ■ It has higher power handling capability compared to stub-type designs and a shorter matching response time. ■ The matching range is broad, up to VSWR 10, allowing for full phase matching. ■ It can be connected to a PC for various control settings, position memory settings, monitoring, and remote control. ■ Natural air cooling eliminates the need for water piping. *For more details, please refer to the PDF document or feel free to contact us.
It suppresses reflected power to zero, achieving improved microwave power utilization efficiency and reduced manpower.
We handle "microwave automatic tuners" used for the design and testing of wireless devices and RF circuits. By monitoring the reflected power from the load and adjusting the slug to optimize the reflection coefficient, it is possible to improve communication quality. Additionally, it is equipped with 10 memory slots, allowing for easy switching between different settings. We also offer high-power automatic tuners and compact lightweight manual tuners, as well as a variety of products including microwave oscillator devices, atmospheric pressure microwave plasma needle generators, and ultraviolet sterilization devices. 【Specifications (ADS-2450200-01/ADS-915200-01)】 ■ Maximum RF power: 200W ■ Maximum standing wave ratio: 15 ■ Maximum insertion loss: 0.3dB ■ Detection voltage for reflected power monitoring: 0-5V ■ Reflected power monitoring connector: BNC *For more details, please download the PDF or feel free to contact us.
It is an automatic aligner that enables high-speed integration.
Model: NM1A-XX Frequency: 13.56MHz Power Input: 1kW Input Impedance: 50Ω Unbalanced Matching Mode: Automatic or Manual Switching Input Connector: HN Connector Output: Busbar Cooling: Water Cooling/Air Cooling Combined Matching Time: Within 0.5 Sec when using preset External Analog I/O: 0 to 10.0V External Serial Communication: RS232C/422/Device Net Power Supply: AC84V to 220V/DC24V (80VA)
This is an automatic tuner compatible with ultra-small high-frequency power supplies.
Frequency: Any frequency from 13.56MHz to 27.12MHz Cooling method: Forced cooling External dimensions: Reference dimensions W140×D155×H110mm
This is an automatic matching device compatible with the superposition of DC power and RF power.
Model: NM3AD-XX Frequency: 13.56MHz Power Input: 3KW Input Impedance: 50Ω Unbalanced Matching Mode: Automatic or Manual Switching Input Connector: HN Connector Output: Busbar Cooling: Water Cooling/Air Cooling Combined Matching Time: Within 0.5 Sec when using preset External Analog I/O: 0 to 10.0V External Serial Communication: RS232C/422/Device Net Power Supply: AC84V to 220V/DC24V (80VA)
It is an automatic matching device capable of matching 2 to 4 frequency bands/broadband with a single unit.
Model: NM1A13-54M-XX Frequency: 13.56MHz 27.12MHz 40.68MHz 54.24MHz Power: 1kW Input Impedance: 50Ω Unbalanced Matching Mode: Automatic or Manual Switching Input Connector: HN Connector Output: Busbar Cooling: Water Cooling/Air Cooling Combined Matching Time: Within 0.5 Sec when using preset External Analog I/O: 0 to 10.0V External Serial Communication: RS232C/422/Device Net Power Supply: AC84V to 220V/DC24V (80VA)
